Ghost Immobiliser Installation

Add a ghost immobiliser to your vehicle to protect it from car thieves. Our TASSA verified system protects vehicles from hacking, key cloning and vehicle immobiliser bypass.

The system is hidden within your vehicle's wiring loom and is inaccessible to anyone who is looking. It works by creating an e-pin code push sequence that is pushed through buttons already on the steering wheel doors, door cards, and the central console.

No circuit cuts

A car is a prized possession that you spend many years of effort to get, which is why owners want to safeguard their vehicle against theft. However, traditional security systems such as alarms and wheel locks could easily be cut off or bypassed by thieves. A ghost immobiliser, on the other hand is a highly efficient solution that is silent and isn't easily identified by modern thieves.

A ghost immobiliser or a hidden device, is a device that connects to your vehicle's data network CAN to disable the engine. It does this without radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the steering wheel, dash and door panels. This creates a unique pincode that is only available to you. The code can be altered at any time and can be as long as 20 digits long depending on your preference. It also has an emergency code that you can use in the event that you forget your PIN.

The ghost immobiliser is helpful to prevent the relay box inside your home from transferring the signal of your car key, which would open the doors and start your vehicle. It also blocks advanced methods of stealing your vehicle, such as OBD port hacking. The device is small and weatherproof, which means it's hard to spot and even harder to tamper with.

Another advantage of the ghost immobiliser is that it can be put in your car without any permanent marks. This is ideal for those who are planning to sell their car in the near future. It's also a lot more efficient and less time-consuming to install than the factory-installed system.

The Autowatch Ghost, a revolutionary new-generation device, prevents thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a stealthy system that can be put in place without removing wires and requires no additional key fobs. It can also be connected to the vehicle's original ECU and prevents thieves from bypassing it by using a new key or replacing the ECU with a "relay". This system is TASSA verified and can be linked to an International Security Register, allowing owners confidence that their vehicles are secure from theft.

No RF scanning

You'll want to safeguard your vehicle from theft when you have spent a lot of money and spent a lot of time customizing it. One method to do this is by installing an immobiliser. This will stop your engine from starting unless you enter a unique PIN. You can create a 20-digit PIN by pressing the buttons on your dashboard and steering wheel. This will ensure that only you are able to drive your car. It is also possible to set up a service and valet mode that allows you to start your car for a short period without entering the PIN. This allows your technician to work on your vehicle without you being present. This feature is ideal for those who want to save time and simplify their lives.

Ghost immobilisers are new generation device that connects to your vehicles CAN data network and utilizes the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to be discreet, with no indicators or sounds to signal it and can be installed anywhere on your vehicle without disturbing the aesthetics of your prized possession.

This stealthy device has been approved by TASSA and can reduce your insurance costs. It comes with a tracking feature that allows you to locate your vehicle, even if it's gone missing. This is useful if you have a costly or rare vehicle that you've spent lots of time making it your own.

The autowatch ghost immobiliser fitting Ghost can be used in conjunction with an iPhone app to enable you to start your car remotely in the event that you have forgotten your PIN or are not able to enter the vehicle for some reason. This feature is ideal for when you have to take your kids to school or go on errands, but don't want having someone else drive your vehicle. It is also helpful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.

The Ghost is unique in that it doesn't transmit or detect radio frequencies and is therefore undetectable by thieves using RF scanning and code grabbing technologies. It also has the ability to protect your car against key copying and ECU swapping, which are common methods of car theft.

No key cloning

Ghost immobilisers are a great option to protect high-end automobiles and are designed to stop key replication. They stop your car from being started without a PIN code being entered along with the regular key fob. This makes it very difficult for thieves to steal your vehicle, and may deter them from doing it initially. This is a particularly good option if you've invested a lot of time and money customizing your vehicle or own a unique or expensive model.

These immobilisers are connected to the vehicle's CAN data network and are completely hidden, which means there is no visible sign of its presence in the vehicle. It is also impossible for thieves to locate the device using radio frequency scanning or code technology for grabbing. This means that a criminal will have to spend a lot more time in order to successfully get your vehicle.

A criminal will need to know the unique pin sequence and the exact location of the ghost in order to avoid it. However, the pin code will be specific to you and may be changed as many times as you want. The pin you select is easy to remember but mathematically difficult for anyone else to understand. Additionally, the engineer will provide you with an emergency pin code to override if you forget the pin.

The Ghost CAN Bus immobiliser can be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and fully customisable to match the appearance of your car. It is also affordable and simple to use. You can even transfer the device to a different vehicle if you change vehicles in the course of ownership, as long as the new vehicle is compatible with it.

The CAN bus immobiliser is also compatible with a variety of other security features. For example, it can detect the damage to your vehicle and warn the owner. It could also shut down the engine if it senses that the vehicle has been damaged. The system can protect your vehicle from hacking and key duplication. It can also detect vibrations or contact with the vehicle. It can also alert the owner if the vehicle is moved.

No OBD port hacking

Ghost employs an immobiliser hidden in the module that is connected to your vehicle's CAN data network which stops thieves from gaining access to your vehicle to disable the alarm, or deactivate the key fob and generate new keys. This technology is a major improvement over the methods that have been used by thieves in the past to steal your car. The CAN data network also ensures that the system won't be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that protects against key-cloning, hacking and copy-cat car theft. It is not equipped with LED indicators or key fobs, instead leveraging the buttons in your steering wheel, centre console and door panels to let you create a unique PIN sequence (up to 20 button presses) that needs to be entered before you can drive your vehicle away.

Modern thieves employ diagnostics to identify circuit cuts in your vehicle. They are able to bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not detected by diagnostic tools of a professional. It can be even installed on vehicles equipped with anti-theft devices.

A Ghost immobiliser also has a significant advantage: your vehicle will only start by someone who knows your PIN code and physically has access to your vehicle. This is a major advantage over traditional security systems which can be bypassed with simple cable alteration, a screwdriver or an universal remote controller.

If you forget your PIN you can easily reset it by using the emergency PIN override function on a mobile device or computer. This is useful if need to start your car after having left it in a garage or with the valet parking service.

The Autowatch Ghost 2 has been certified for insurance by TASSA and can be installed by our authorised installers. It has an RFID fingerprint system that can identify individual parts, Autowatch Ghost Immobiliser fitting which allows for the return of stolen items if they are found. It can also be set to'service mode', which allows the engine to be started when your vehicle is in a garage or with valet parking, but you will need to enter your PIN code once more to exit the vehicle.