sash window locks with key Lock Door Handles

If you're looking to increase the security of your home without compromising the aesthetics, choose timber sash window lock door handles. They can be used with mortice locks or sash lock and are also able to be used with a nigh latch to provide extra locking for internal door.

These handles consist of a handle/lever on a backplate and are generally used with a three or five lever mortice lock. They can be paired with tubes latches.

Lever Lock Handles

There are a variety of lever handles to match any style. Rustic lever locks are popular in both farmhouse and modern homes. Classic lever handles are round or spherical, and easy to hold. They are simple, affordable and fit in with any style of home decor. Select polished or satin nickel chrome handles to create a sophisticated look. These finishes are easy to clean and are durable. Antique bronze and polished Brass are also options. Many handles have a decorative design, such as tiny amber worm eyes or long-horned crystals. Some levers feature a star, pin or other shape molded in the bottom.

To change your lever lock door handles, first ensure you have the correct screwdriver or other tool to remove them. Based on the design and model you may have to make use of an awl or nail to remove the lever handle. Some lever handles have an oblique notch or hole at the base of the handle that can be used to pry them open.

Follow the manufacturer's directions for removing your existing handles after you have the proper tool. Examine the spindle of the new lever. Doors that are morticed (cut into the door) to accommodate latches from the past or locks and must be fitted to a certain spindle size. The majority of lever handle manufacturers have a standardized door spindle size for handles.

If you wish to replace a sash lock door handle, take off the handle you have previously installed and disconnect the tubular latch bolt from the strike plate that is on the door frame. The latch bolt needs to be inserted into an opening in the door's frame and then connected to the strike plate.

When installing a new lever door handle, it is essential to know that all ADA (Americans with Disabilities Act) approved handles are designed to be operated with a hand and must not require users to tightly grip or twist their wrist. To be in compliance with ADA compliance standards the lever door handle cannot be operated with the thumb and finger, or even the entire hand.

wooden double glazed sash windows Lock Handles

The main function of sash lock door handles is to pull the moving sashes together tightly to create a seal. This prevents drafts from entering the room and helps to maintain interior home temperatures, saving energy bills throughout the year. They are also ideal for doors that don't need the security of a keyed locking system.

Sash locks are often referred to as mortice sashlocks. They combine a latch and dead bolt into a case that is fitted in the material of the door. They work with doors with handles and are available in a variety of different options to choose from to fit your home.

The lever handles for locking is operated by a lever with an opening cut into the backplate below. This allows a key to be inserted into the mortice sash to operate the lever. This lock is most commonly used on non-locking interior doors such as those in dining and living rooms. However it is also possible to use with a tubular lock to create a more secure door.

These are designed to hold the sash in place for multiple times, and come with hooks that fit inside the keeper. They're available in different styles and designs to fit into different types of windows like sliding or hinged casement windows. Some are made of cast aluminium, whereas others are made from brass and even wrought iron. These are available in different finishes to match other elements of door furniture, like escutcheons, which secure the keyhole.

The 3 lever sash locks are only suitable for use on doors with internal doors. They do not provide the security required by insurance companies. They are also less resistant to forced entry than their five lever counterparts, making them more vulnerable.

A door sash that has five levers is the best option for doors that are external. It offers higher levels resistance to forced entry and is more difficult to pick or bypass. These locks feature an upgraded design that's been tested and certified to meet stringent security, fire and disability requirements.

The first step to replace the handle of a sash windows lock is to remove the old fastener by taking the screws from both ends. Make sure you have a screwdriver in your bag, and carefully separate the components to avoid damage. Mark the screw holes using a pencil so that you can ensure that the new fastener is properly aligned when you are ready to put it in place it. Remove any dust or paint particles, and then screw into the new fastener. Test the handle to make sure it works correctly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which sits inside a door and is operated by turning the handle. It is designed to close a door but it doesn't lock it as mortices. They are typically used on doors that are internal and there is no need secondary double glazing for sash windows locking. They can be fitted with lever or knob handles.

There are a variety of sizes of tubular latches available. The sizes range from the economy to the high-end architectural. The size you select will depend on the purpose of the door as well as whether you require the function of a lock. For example bathrooms may need to have an open and thumbturn mechanism in the event of an emergency, so you will need an latch that can be locked.

The backset of your door will affect the latch you choose. You should select the latch with an backset measurement that is in line with the distance between the edge and the centre of your door's opening for the handle rose or knob. This will ensure that the door handle and knobs can operate the latch without a hitch.

If you are fitting a spring or unsprung lever or door knob then it is important to select a heavy duty tubular latch with an oversized sprung follower and tongue. This will ensure a smooth and consistent latch action and stop it from becoming sluggish or unresponsive after prolonged use.

Once you've selected the appropriate latch to meet your needs, the next step is to fit it to the door. First, make sure the latch is level with the top of the door frame/casing by making a mark on the location of the latch plate then drilling holes for it. Countersink drill bits will help create the correct recess so that it can fit comfortably.

After the latch has been installed, you can install it onto the door. It is crucial to ensure that it is functioning properly before fitting your door handles and installing your locks, so be sure to test it by opening and closing the door several times. If the door isn't working properly, try lubricating the door using WD40. Then, try it again. If you continue to encounter problems then it might be necessary to consult a locksmith or a professional installer.

Keyhole Handles

Keyhole handles function with a tubular latch that is placed inside the door to allow it to be closed and opened it. The handle is able to engage the latch when pushed down, and releases it when pulled up. These kinds of handles are most often employed on doors that are internal such as living rooms and doors for dining rooms, but they can also be fitted to front doors if they are paired with a nightlatch.

Door knobs are more contemporary handles that include spring levers/handles with a round or square fixing stem, and a matching thumb-turn or escutcheon. They come in a variety of styles and finishes to suit the doors of your home. They can be utilized with Euro cylinder locks or multipoint locking systems that provide an additional layer of security to the door. This is accomplished by putting several points of locking along the door's height. It requires compatible door handles with the proper lock centre size to fit the barrel of the cylinder.

A keyhole escutcheon is an escutcheon that covers the door's existing keyhole that hides it from view and give a more stylish look to the handle. They can be purchased as a pop-on or screw-on design and come in a variety of styles to match your door handle. A recessed escutcheon can be fitted to the door's edge to further conceal the keyhole and create an updated look.

Some of the handles are compatible with Euro-cylinder locks. They are designed for uPVC doors and require compatible handles with the Euro cylinder hole and screw holes in the backplate. These handles could also require a Euro-cylinder escutcheon or a standard escutcheon depending on the application.

It's important to know the differences between a sash or mortice lock and a tubular lock, as well as the compatibility requirements for each. You'll have to take into consideration the door thickness and door hinges, as well as frame reinforcements, as well as the door handle backplate size, lock centre dimensions and the screw centres for the cylinder.