Double Glazed Door Lock Replacement

Double-glazed door locks can appear like a daunting task, but with the proper tools and step-by guideline, it's manageable. Replacing your window lock will increase the energy efficiency of your office or home and provide additional security.

Start by removing the retaining screw from the faceplate of the lock cylinder. Use a screwdriver to turn it to the left and remove the cylinder.

replacement patio door lock Cylinders

Euro lock door cylinders or barrel locks are found in nearly all uPVC double-glazed uPVC doors. They provide security and dependability and have been verified to function. Replacing a cylinder is often required due to a key being stolen or lost, but also due to aging and the potential for corrosion. Our cylinders are available in a range of styles, sizes and finishes that will fit your door. Depending on your requirements, you can select between 1-star or 3-star cylinders. The cylinders are protected by BSI Kitemarks which are approved for insurance.

Cylinder locks are built on simple pin & barrel systems that have been in use for many years in almost all uPVC doors. The problem with these locks however is that burglars are able to manipulate them with tools that allow them to "snap", and gain entry to the home. We recommend that you replace patio door lock your cylinders with snap-resistant cylinders to protect yourself from this common burglary technique.

To remove the old cylinder, you must first open your door. Then, locate the screw at the edge of the door between the outer handle and the inner handle. The screw will typically be distinct from the other screws as it's a different colour. This screw can be removed completely using an screwdriver. If the screw won't move, try applying a 3 in 1 type of oil and letting it sit for an hour or so. This may help. Alternately, you could chisel the screw head in the direction of 'unscrew to shock it loose.

After you have removed the screws for the handle and loosening the cylinder, you can do this by turning it in any direction (the direction will depend on which side of your door the locking mechanism is located). Once the cylinder is loosened, pull it towards you and take it off. Then, measure the cylinder's width and length to purchase an alternative.

We provide a range of standard type half and full cylinders, and a variety of specialised security cylinders that are certified for anti-snap and anti-bump resistance. These are BSI kitemarked and Secured by Design accredited as well as offering high levels of physical security for your home.

Replacement handles

If you're replacing handles on a uPVC front door, there are many designs and colours to choose from. The most important thing to remember is that the handle needs to fit correctly. The screw size and keyhole size should be identical. Use our handy guide to measure uPVC handles. This will enable you to take the most accurate measurements and ensure that you purchase the right handle. It is also worth looking into upgrading to a security set of handles. This will make your uPVC door more secure and prevent thieves from being able open the lock.

The majority of major uPVC handle manufacturers will offer handles that can be used in replacement door locks for double-glazed doors. You can find a huge range of lever and lever handles in various styles from companies like ERA, Avocet and Millenco. You can even pick the lever handle with a snib option for extra security.

Depending on your requirements you may need to replace the whole handle or just the lever. This is usually due to wear and tear, but can also be caused by a lock mechanism problem. If your lock mechanism is faulty you should contact an Locksmith. However, if you're only looking to replace the handle of the lock, you can do it yourself.

After you've taken your measurements, you can then compare them to the sizes of replacement handles available on the market. The most common size is the 92pz handle but there are also 68pz and 70pz handles for uPVC doors. You will also need to make sure that the new handle has an appropriate backset and faceplate. This will ensure that the screw holes are aligned correctly and the lock in the door isn't damaged.

If you're replacing the handles on your door and would like to upgrade to a greater security level, then it's recommended that you consider a Sold Secure SS301 or 2* Kitemark set of handles. These handles are safe because they have been approved by the police, and they have anti-drilling as well as anti-picking features.

Faceplates for replacement

Door keepers and faceplates function as a last line of defense against burglars. They signal to burglars that your home is safe, stopping them in their tracks. They are important and should be purchased at an authorized hardware store, whether online or in person. This will ensure you get a sturdy device that will shield your doors and windows from corrosion and damage over time.

It is also important to be aware of the differences between a multipoint uPVC lock and a single point locks, they may differ just as much as apples and oranges. You'll need to choose the correct faceplate or backset depending on the kind of lock you're installing. A 'backset is the distance from the door's edge to the center of the handle or cylinder.' A 'faceplate is the metal band that is used to cover the edges of the mechanism. These are the primary factors that determine which parts are required for your new uPVC locking system. Then it's just a case of following the basic instructions on how to install them!

Replacement locks

Based on your preferences, there are various options available when it comes to replacing locks for uPVC doors. They are usually made to withstand pressure and provide enhanced security for your home. There are uPVC multipoint door locking systems that can be used in commercial establishments as well. These are usually provided by trusted manufacturers like Fullex centre door lock gearboxes and Gardinia doors locks made of uPVC.

When choosing a new lock for your window, you should know the type of backset you require and the faceplate you need. Ensure the new lock is compatible with the existing ones to ensure it's secure and is properly fitted. For instance, if the current lock has a 35mm backset, and a split spindle, then it might be beneficial to purchase a new uPVC door handle with an appropriate gearbox, like the Laird Saracen Surelock.

In the same way, you must ensure the new lock you choose is compatible with the dimensions of the handle hole and faceplate of your windows. This is essential to ensure an effortless connection between the handle and the window lock.

Install the new lock into your window after you have selected it. It is a good thing to speak with your local locksmith during this process. They can assist you in choosing the correct lock. Finally, you should test the new lock to ensure it's functioning properly.

To avoid this, you should replace your double glazed windows with a lock of high-quality that is resistant to forced entry. This will protect your valuables and keep your family members safe from burglars. Replacing the window locks is a reasonable alternative that can improve the security of your home. The process can be challenging for those who aren't familiar with the procedure. To finish the job successfully you must follow these steps carefully.